How To Sand Your Own Wood Floors

Wood floors are a lovely addition to any home and are typically suggested for those with busy domesticity– which might come as a surprise for some offered just how much damage life, in general, can trigger to our house, whether it’s kids, pet dogs or clumsy adults!

Among the greatest features of wood floors is that they can be sanded and refinished several times throughout the years instead of being replaced, which is helpful should any of this damage occur to them, or even if you just fancy a change.

We have coordinated with online flooring merchant Luxury Flooring & Furnishings to produce a guide on sanding your flooring, from start to finish. Before you start, here is a list of what you will require:

  • Safety glasses
  • Dust Mask
  • Ear Defence
  • Brush/vacuum cleaner for the flooring
  • Sander (both a ‘drum’ and ‘edging’ sander if possible. If you are utilising both, double the quantity of sandpaper).
  • 12 sheets of 24 grit sandpaper.
  • 8 sheets of 40 grit sandpaper.
  • 8 sheets of 80 grit sandpaper.
  • 5 sheets of 120 grit sandpaper.
  • Optional: Wood stain (if you want to colour your flooring).
  • Varnish (any gloss level– but satin surface is suggested for modern looks, reduced glare and less visible flaws).
  • Brush for Varnish.

If sanding becomes part of a complete design effort, leave skirting board work and painting etc till completion so the dust does not ruin your efforts.

Prior to you start, clear the floor of any furnishings, design, drapes and other items that are touching the floor or might disrupt the task. If possible, get rid of any doors in the space to avoid potential damage. If not, it will be great to thoroughly work around them.

Next, guarantee there will be no danger of damage to the sandpaper or sander by scanning the floor for any extending nails, staples or screws.

Remove staples and screws as necessary, and hammer any nails into the flooring– around 2mm underneath the surface area. Once you make sure the floor is smooth, you must clean it by vacuuming, then wiping with a damp fabric and waiting on it to dry. If there are any spaces in the floor, it is recommended to fill these with paper mache.

How to Sand Your Own Wood Floor: Protection.
There are 2 layers to security, these are called personal defence, and the security of your house. Be careful not to neglect these to save effort and time, as health threats could be presented, and any damage will not deserve it.

Start by closing/sealing windows, doors and vents, as dust can easily get away and damage furnishing in other rooms and even contaminate the atmosphere. This can be unsafe if you have any kids, pets or there are occupants with breathing problems.
Plug sockets and other nooks and crannies ought to be covered with masking tape or anything that else that works, as again damage and threat might otherwise result.
For your individual security, open as lots of windows as possible to reduce dust contamination, and use a dust mask, safety glasses and ear defence.
Throughout the job, guarantee you watch your footing and that you will not trip over the wire from the sander.
Again, do not neglect these, as this is arguably the most important element of the job.

Post Sponsored by