How To Sand Your Own Wood Floors

Wood floors are a lovely addition to any home and are typically suggested for those with busy domesticity– which might come as a surprise for some offered just how much damage life, in general, can trigger to our house, whether it’s kids, pet dogs or clumsy adults!

Among the greatest features of wood floors is that they can be sanded and refinished several times throughout the years instead of being replaced, which is helpful should any of this damage occur to them, or even if you just fancy a change.

We have coordinated with online flooring merchant Luxury Flooring & Furnishings to produce a guide on sanding your flooring, from start to finish. Before you start, here is a list of what you will require:

  • Safety glasses
  • Dust Mask
  • Ear Defence
  • Brush/vacuum cleaner for the flooring
  • Sander (both a ‘drum’ and ‘edging’ sander if possible. If you are utilising both, double the quantity of sandpaper).
  • 12 sheets of 24 grit sandpaper.
  • 8 sheets of 40 grit sandpaper.
  • 8 sheets of 80 grit sandpaper.
  • 5 sheets of 120 grit sandpaper.
  • Optional: Wood stain (if you want to colour your flooring).
  • Varnish (any gloss level– but satin surface is suggested for modern looks, reduced glare and less visible flaws).
  • Brush for Varnish.

If sanding becomes part of a complete design effort, leave skirting board work and painting etc till completion so the dust does not ruin your efforts.

Prior to you start, clear the floor of any furnishings, design, drapes and other items that are touching the floor or might disrupt the task. If possible, get rid of any doors in the space to avoid potential damage. If not, it will be great to thoroughly work around them.

Next, guarantee there will be no danger of damage to the sandpaper or sander by scanning the floor for any extending nails, staples or screws.

Remove staples and screws as necessary, and hammer any nails into the flooring– around 2mm underneath the surface area. Once you make sure the floor is smooth, you must clean it by vacuuming, then wiping with a damp fabric and waiting on it to dry. If there are any spaces in the floor, it is recommended to fill these with paper mache.

How to Sand Your Own Wood Floor: Protection.
There are 2 layers to security, these are called personal defence, and the security of your house. Be careful not to neglect these to save effort and time, as health threats could be presented, and any damage will not deserve it.

Start by closing/sealing windows, doors and vents, as dust can easily get away and damage furnishing in other rooms and even contaminate the atmosphere. This can be unsafe if you have any kids, pets or there are occupants with breathing problems.
Plug sockets and other nooks and crannies ought to be covered with masking tape or anything that else that works, as again damage and threat might otherwise result.
For your individual security, open as lots of windows as possible to reduce dust contamination, and use a dust mask, safety glasses and ear defence.
Throughout the job, guarantee you watch your footing and that you will not trip over the wire from the sander.
Again, do not neglect these, as this is arguably the most important element of the job.

Post Sponsored by

How To Soundproof Your Home

For a number of us, home is where we relax, escape from the outside world, and experience moments of euphoric peace. But all too often, our fortresses of privacy are attacked by the noises of traffic, neighbours, pedestrians, and building and construction, looking for to disrupt us and jolt our minds out of their restfulness.

This might be a sign of modern-day life, but that does not indicate we need to endure it. In this article, we will explore how to soundproof your home and restore the zen of a peaceful home.

To address this, we need to initially comprehend what sound is and how it runs. At its most basic, a sound is the energy produced when something vibrates. This energy travels out from the source in waves, triggering the air and any things they come into contact with to likewise vibrate with the same frequency.

Unlike light, sound waves take a trip through many objects with relative ease, which is why you can still hear traffic sound regardless of having your windows closed.

Soundproofing works by including additional obstacles which acoustic wave must travel through, reducing the energy of each wave up until it is inaudible or dampened to such a degree that it is barely audible.

Most common reasons people soundproof their houses
There are many reasons why individuals choose to soundproof their homes, but the most common is to stop noise from getting in/out and to increase the value of the residential or commercial property.

To stop noise from getting in
If you live in a noisy area with a lot of road and foot traffic, then you understand how interfering with street noise can be. The noise of engines, shrieking tires, horns, sirens, and yelling are all commonplace and can quickly interrupt your sleep or concentration.

Inconsiderate and noisy neighbours can be a nightmare. Whether it is an obscenely loud TV or non-stop late night celebrations, they can seriously impact your quality of life by interrupting your sleeping patterns and rejecting your mind the chance to recuperate from a full day of people demanding your attention.

To stop noise from getting out
Artists, vloggers, and others whose occupation requires a recording area might take their neighbours into factor to consider and soundproof their home, or a room at least. This is carried out in order to keep the sound that they make down to a minimum so regarding not interrupt the lives of others residing in the area.

Increased worth
Well-soundproofed homes supply a particular tranquility. Upon going into, you are separated from the outside world as its noise can’t reach you. This peacefulness can increase the worth of your home considerably, specifically if you live next to the main road or in an especially noisy area.

Post Sponsored by your Local Window Repair Glazier.

How to Install Vertical Blinds

For decades the vertical blind was practically solely used in office buildings, however as our tastes in house décor progressively ended up being more varied, different styles of vertical blinds were launched to the market.

Whether you are remodelling a new house or simply sprucing up a particular room, your choice of window coverings varies from easy drapes to futuristic, programmable glass, and everything in between.

A great deal of us shy away from selecting vertical blinds due to being worried that the installation procedure will be overly complicated and time-consuming. Setting up vertical blinds appropriately is not as tough as you might believe, and with this guide, we aim to make the procedure even simpler.

Tools you need

  • Pencil
  • Tape measure
  • Electric drill + bits
  • Screwdriver
  • Screws
  • Blinds
  • A helper
  • Ladders/ stepladders

Pre-installation preparation
No matter which type of vertical blinds you would like, inside or outside install, the first thing you need to do is determine the window so that you understand the size of blinds you require to purchase.

To make sure that the blinds fit properly, you should initially measure from below the window at the point where you would like the blinds to hang. From that point, measure the height to the location where the headrail will be set up.

How to set up vertical blinds– inside install
Open the blinds’ product packaging, read the guidelines, and ensure you have all of the essential parts.
Lay the valance on a flat surface area and location the brackets on it 7.6 cm (3 inches) from each end.
Using a pencil, mark the screw holes for each bracket.
Drill the screw holes, if possible use a drill bit which is smaller sized than the screws.
Mark the position of the brackets with your pencil on the window frame. The brackets must be 7.6 cm (3 inches) far from the outdoors edge and 2,5 cm (1 inch) away from the glass.
Hold the bracket in position, position a screw in the hole and tap it with a hammer. Repeat this up until you have actually marked the positions of all 4 screws.
Have your helper hold the valance in place, make certain that the pre-drilled holes compare with the pre-marked locations.
Connect the very first bracket and repeat for the 2nd.
Connect the headrail, most of blinds have a headrail which merely snaps into place. Describe the item guidelines for the correct setup treatment.
Attach the vanes. If you are not sure on how to do this there will be a different section below describing the procedure.

How to install vertical blinds– outside install.
Open the blinds’ product packaging, read the directions, and ensure you have all of the needed elements.
Find where the headrail will be installed, pick a location at the bottom of the window, ideally the centre, and procedure from where you desire the blinds to stop to the top of the window and mark it with your pencil.
Position the headrail straight on top of the pencil mark and have your assistant hold it in place.
Measure 10cm (4 inches) from the edge of the window and make a pencil mark above the headrail, repeat on the other side.
Eliminate the headrail and attach the brackets to the wall, for additional stability pre-drill the holes and insert wall anchors for the screws.

Get the ideal spacing, pull the cord until all of the vanes clips are an equal distance from one another.
Turn the vane clips so that the slit is dealing with towards you.
Connect the vanes. At one end of each vane, there is a hole, push that end into the vane slit up until the hole is caught by the hook inside the clip.
Repeat this for the remainder of the vanes.

How to preserve your vertical blinds?
After the setup, add cleaning up the blinds to your list of weekly chores to make maintenance easier, this will also decrease the need for a thorough cleaning.

Using the brush accessory, vacuum the blinds starting from the leading and work your way down. Washing vertical blinds can be a little bit tricky as most types can not be machine washed and getting rid of each vane can be a trouble. For a basic yet reliable cleaning approach see below.

You will need:

  • One container of warm, soapy water;
  • One pail of clean, cold water;
  • Old towels or a tarp;
  • A blind cleaning tool.
  • How to make your own tools?
  • Get a set of barbecue tongs and one sponge.
  • Cut the sponge in half.
  • Glue each half sponge to the ends of the tongs with waterproof glue.
  • Allow the glue to dry over night.

How to clean up the blinds?


  • Place the old towels, or tarpaulin, below the blinds to protect the flooring from drips.
  • Dip the tongs in the warm, soapy water up until the sponges are filled.
  • Starting from the top, position the vane between the tongs so that there is a sponge on each side.
  • Press the tongs together and wipe down towards the bottom of the vane.
  • Rinse the sponges in the clean water.
  • Repeat until each vane is tidy.
  • Get rid of any excess water by gently patting the vanes with a towel.
  • Permit them to air dry.
    So there we have it, your guide on how to set up vertical blinds properly. With a bit of preparation, an assistant, and this guide you’ll have your brand-new blinds installed in no time.

Post Sponsored by